Configuration issues.

The configuration of the inverters has changed radically. In the first beta release I forgot to include configuration samples for the inverters that need additional information. I have listed them here.

I have listed them as inverter.<x>.mandatory.serialnumber. Where <x> ofcourse is the same number as the rest of the inverterconfiguration. A full set might look like:

inverter.2.mandatory.invertername=OK4E
inverter.2.mandatory.wattpeak=93
inverter.2.mandatory.kwhkwp=550
inverter.2.mandatory.invertertype=10
inverter.2.mandatory.inputdirectory=C:/temp_mk/SEED/ok4e
inverter.2.mandatory.barcolor=0,180,0
inverter.2.mandatory.linecolor=0,180,0
inverter.2.mandatory.fromdate=28-02-2009
inverter.2.optional.comparelinecolor=51,255,51
inverter.2.optional.correctionfactor=1.00
inverter.2.optional.inclination=36
inverter.2.optional.orientation=183
inverter.2.optional.tilldate=
inverter.2.mandatory.serialnumber=46091

The additional configuration lines for each inverter.

Aurora One

inverter.<x>.mandatory.columnname

OK4E

inverter.<x>.mandatory.serialnumber

SolarLog

inverter.<x>.mandatory.wattcolumnlocation

Sunnybeam Bluetooth

inverter.<x>.mandatory.kwhcolumnlocation

Sunny Explorer

inverter.<x>.mandatory.kwhcolumnlocation

Sunny Webbox

inverter.<x>.mandatory.paccolumnlocation

XS Mastervolt

inverter.<x>.mandatory.serialnumber

 

1 Comment

  1. Wayne

    Got it – Case sensitivity gets me every time.

Comments are closed.